Battle-axe land wheel measurement and alignment machine
MelodyDong's Whatsapp+8618689401703
| Adjust camera beam up and down through remote controller, Camera beam Length:2782mm |
| Column lift height: 1450-2110 |
| 32''TV &19''LCD show Measuring data & Parking Turntable Function |
| with static measuring,Turn Wheels & Static Alignment measuring function |
| 2pcs 5 Mega pixel camera |
| One interface show all parameters of front wheel and rear wheel(Toe,Camber,castor etc) |
| with Track width and Wheelbase measuring interface also |
| Calibration data Saved inside of Camera instead of Software |
| No need to Re-calibartion even Exchange Camera Inside Processor |
| With Parking Camera Function |
Parameters | Precision | Resolution | Measure Range |
| SAI/KPI | ±3′(±0.05º) | 0.6′(0.01º) | ±20º |
| CASTOR | ±3′(±0.05º) | 0.6′(0.01º) | ±20º |
| CAMBER | ±2′(±0.03º) | 0.6′(0.01º) | ±10º |
| TOE | ±2′(±0.03º) | 0.6′(0.01º) | ±10º |
| THRUST ANGLE | ±2′(±0.03º) | 0.6′(0.01º) | ±10º |
| TRACK WIDTH | ±2mm | 0.1mm | 1200-2200mm |
| WHEELBASE | ±2mm | 0.1mm | 1600-4200mm |
| WHEEL OFFSET | ±2mm | 0.1mm | ±200mm |
| LATERAL DEVIATION | ±2mm | 0.1mm | ±200mm |
| CASTOR OFFSET | ±2mm | 0.1mm | ±200mm |
| RIM SIZE | 12''-24 | // | // |
Announcement: As long as totally alignment vehicle strictly according to manual’s steps And suspension system condition is good, then can get above precise data.
Beam Up and Down Controlled by Manually Remote Controller,Lift Height Between 1450-2110mm
Camera Features:Patended Real 5 Mega Pixel Industrial Camera 2pcs,Welcome Test
Machine's Features
Software Database Bank
Worried About Infringing on Software? Kindly check Battle-Axe Software Proprietary Intellectual Property Rights
Q:hello Melody, Does Wheel alignment need to Recalibration after we got the machine?
- No, We already Calibration well and Test Real Vehicle in our factory, Just Install according to Video Instruction and Operate
Q:How much mints your Wheel Alignment need to Alignment one Vehicle?
- Well it is Deponds, if your people Familier With Our machine operate 45 seconds to get measuring data, adjustment not include
-it will be more fast,around 30 seconds Enough if you use "Front Alignment" or "Static Measuring"Function
Q:We Worried About Camera, Bad Experience with China some Brand, Very Headache on Camera Replacement and Recalibration
-We understand you Clearly, Well Battle-Axe Promised you 100% About our Camera Quality, No one customer complain the quality of Camera still now since we sell 2015 for 2nd 3D wheel alignment,
-In Case the camera not working well, no need Recalibration also
Q:We also Worried about the target, you know sometime, people will damage it like vehicle pressed it and break it ..then the machine must to stop and i have to wait for new target, how about Battle-Axe?
-Battle-Axe Target Plate Adopted Original ABS material from Korea,very durable even Vehicle pressed on it ,still can working ,you can visit the Video above
-In case one target plate real break ,can not working any more , ok, 2 target plate break, No problem, your machine still can creat profit for your workshop , we have "Front Alignment Function"
-We sent you one or two new target plate, you just replacement .. NO NEED recalibration again
Q:i am Dealer and i want the Software with Our Brand Inside
-We Supply Freely OEM Service for Software service for Dealer as long as your Quantity can reach 20 set/year
-you can request us delate/Add any function or feature you want,make your brand more famous locally
Packaging & Shiping
| Item | Package Size | N.G/W |
| camera beam | 3050x400x430MM-1pcs | 20/31.5kgs |
| cabinet | 900x600x1300mm-1pcs | 135/169.5kgs |
Battle-Axe Wheel Alignment Factory For Reference
Battle-Axe Wheel Alignment Customer Show
-Warranty Period: within 12 months From Bill of loading date not including PC Unit including computer hard disk, LCD and Printer
-Computer, Printer and TV from China original, kindly check your local service center, or you can order our wheel aligner machine without computer,printer and LCD.. buy from local in order to get after service
-Computer Brand we used HP, Printer is Canon and TV Set from Haier (we will not give futher notify if we change brand)
-Easy spare parts like USB power line, insurance tube we will sent together with whole machine for future replacement, for other spare parts belongs to chargeble Range if replacement, Express cost beared by Buyer
-if the Parts can be Repair, we will not charge cost for Repair, but come and back Express cost on Buyer side
-Insurance will not covered with any Shipment Except for buyer Special Mentioned
-Generally Clear customs Documents we only supply Bill of loading, packing list and Commercial Invoice, if any special documents need like CO kindly Inform us in advance, otherwise we will not responsible for loose during clear customs
BATTLE-AXE is the leading manufacturer of tyre service equipment in China, specializing in Dynamic 3D Wheel Alignment System, CCD wheel alignment, Scissor Tyre Lifting Equipment, and Pneumatic Car Jack Since 2002, Located in Zhongshan City Guangdong Province China Not Far From Hongkong & Macau..Nearest Sea Port is Guangzhou and Shenzhen
Milestones
Q:Can computer and camera beam be installed in different room?
A:Yes,We will provide different install solution according to your workshop condition .
Q:Can we use 380V/50HZ as power supply?
A:Yes, Additional cost needed
Q:Can you install wheel on cabinet make the machine movable?
A:Yes, but it’s only valid on 8S and 708X model
Q:How to update the database?
A:Freely whole life through online
Q:Can you customize logo, color,interface on cabinet and software interface?
A:Yes, As long as the logo is not too complicated , the color is mo more than 3 kind
And we can customized the Logo function for your request if you want to add or remove any function and database bank can be yours name also
Q:Can i be exclusive representative ?
A:We are looking for long term exclusive distributor except in Brazil, India, south Africa,Pakistan, Malaysia, Welcome to join BATTLE-AXE !
Q:How many 3d wheel aligner models do you have ?
A:We have 5 standard models.What;s more we have strong R&D and customization ability to develop your own model .
Q:Where’s your factory ?
A:Our factory is located in ZhongShan city within 2 hours drive from ShenZhen ,GuangZhou,ZhuHai or Macau.
Q:Can i buy wheel aligner kit?
A: Yes, But please be noted that our software can only operated with our own target plates and cameras.
Q:How to calibrate the camera and target plates ?
A:For camera , unless they are totally destroyed or crashed to deformation .They don’t need calibration.Camera calibration need calibrate bar.Target plates calibration is simple.The calibration finished in few minutes,following software instruction .
Q:Do i need to Re-calibration after equipment arrived and installed well?
A:No need , we already calibrate well in factory before departure
Q:Could you send me a demo software ?
A:Yes, Contact us for download linkage
Q:Could you transfer the software language to our native language ?
A:We already have Spanish, English,Portuguese,Japanese and Chinese language.If you need other language we can add it for you .Or you can help us translate(we prefer this way ).We will offer you discount as your efforts.
Also want to Install Alignment scissor lift for your workshop? Kindly Check Battle-Axe 3.5tons or 4tons Scissor lift FOLLOWING
How to Contact us ?
Send your Inquiry Details in the Below, Click "Sent" Now
or contact Melody through Whatsapp +86 18689401703
