Gram Serie 1.Fe (Steel), Lead-free Alternative 2.Salt-spay Tested to Resist Corrosion for 48-72h 3.Apply to Passenger Car & Light Truck 4.Available with Blue Tape, White Tape, Norton Tape, 3M Tape and Yellow Tape | ||||
| Type | Model | Detail | Feature | Package |
(5g+10g) x4 | FA-1S | Zinc Plated Only | Round Corner, Thickness 4.0mm with tape & Width 19mm | 100 Strips (6kg) per Box |
FA-1SA | Zinc Plated and Powder Coated | |||
FA-1SC | Zinc Plated and Black Powder Coated | |||
FA-1SD | Dacromet Coated | |||
FA-1E | Zinc Plated Only | Straight Corner, Thickness 4.0mm with tape & Width 19mm | ||
| FA-1EA | Zinc Plated and Powder Coated | |||
FA-1EC | Zinc Plated and Black Powder Coated | |||
FA-1ED | Dacromet Coated | |||
| 5g x12 | FA-2S | Zinc Plated Only | Round Corner, Thickness 4.0mm with tape & Width 19mm | |
FA-2SA | Zinc Plated and Powder Coated | |||
FA-2SC | Zinc Plated and Black Powder Coated | |||
FA-2SD | Dacromet Coated | |||
| FA-2E | Zinc Plated Only | Straight Corner, Thickness 4.0mm with tape & Width 19mm | ||
| FA-2EA | Zinc Plated and Powder Coated | |||
| FA-2EC | Zinc Plated and Black Powder Coated | |||
| FA-2ED | Dacromet Coated | |||
| 10g x6 | FA-3S | Zinc Plated Only | Round Corner, Thickness 4.0mm with tape & Width 19mm | |
FA-3SA | Zinc Plated and Powder Coated | |||
FA-3SC | Zinc Plated and Black Powder Coated | |||
FA-3SD | Dacromet Coated | |||
| FA-3E | Zinc Plated Only | Straight Corner, Thickness 4.0mm with tape & Width 19mm | ||
| FA-3EA | Zinc Plated and Powder Coated | |||
| FA-3EC | Zinc Plated and Black Powder Coated | |||
| FA-3ED | Dacromet Coated | |||
| 10g x12 | FA-3L | Zinc Plated Only | Round Corner, Thickness 5.0mm with tape & Width 25mm | 50 Strips (6kg) per Box |
| FA-3LA | Zinc Plated and Powder Coated | |||
| FA-3LC | Zinc Plated and Black Powder Coated | |||
| FA-3LD | Dacromet Coated | |||
| 2.5g x12 | FA-6 | Zinc Plated Only | Round Corner, Thickness 2.7mm with tape & Width 19mm | 100 Strips (3kg) per Box |
| FA-6A | Zinc Plated and Powder Coated | |||
| FA-6C | Zinc Plated and Black Powder Coated | |||
| FA-6D | Dacromet Coated | |||
| 20g x4 | FA-5 | Zinc Plated Only | Curved, Thickness 4.0mm with tape & Width 19mm | 50 Strips (4kg) per Box |
| FA-5A | Zinc Plated and Powder Coated | |||
| FA-5C | Zinc Plated and Black Powder Coated | |||
| FA-5D | Dacromet Coated | |||
| 50g x4 | FA-18 | Zinc Plated Only | Curved, Thickness 7.0mm with tape & Width 25mm | 20 Strips (4kg) per Box |
| FA-18A | Zinc Plated and Powder Coated | |||
| FA-18C | Zinc Plated and Black Powder Coated | |||
| FA-18D | Dacromet Coated | |||
| 5g x12 | FA-4 | Zinc Plated Only | Trapezoid, Thickness 4.5mm with tape & Width 19mm | 100 Strips (6kg) per Box |
| FA-4A | Zinc Plated and Powder Coated | |||
| FA-4D | Dacromet Coated | |||
1. Pre-treat the rim
Apply a suitable cleaning agent on the area where weight is to be applied. Wipe the area clean and dry.
Please note: be sure to test the cleaning agent on a small area to ensure it will not damage the wheel's finish.
2. Select adhesive weight size
Adjust the adhesive weight to the rim radius. The radius of the weight body must run at least parallel to the rim
radius. It is even better if the radius of the weight is smaller than the rim radius. Cut the correct amount of
adhesive weight needed.
3. Apply the weight
Remove the tape backing and press the center of the weight exactly at the imbalance point.
Please note: Do not touch the tape surface after peeling off the tape backing.
4. Secure the weight
Once the center of the weight is located at the imbalance point, press down the weight to the rim from the
middle towards the outer edges. Firm hand pressure should be enough to secure the weight.
Q1: How long can I get the feedback after I send the inquiry? |
A: Within 24 hours. |
Q2: What's your MOQ? |
| A: Different products have different MOQ, just tell us how many you want. |
Q3: What is your sample policy? |
A: We are willing to supply samples at all your needs. |
Q4: Can you produce according to the samples? |
A: Yes, we can produce from your samples or technical drawings. We can build the molds and fixtures. |
Q5: What is your way of packing? |
A: Generally, we pack our goods in neutral white boxes and brown cartons. If you need branded package, we can pack as your request. |
Q6: What's your delivery time? |
| A: 30-45 days according to the order quantity. |
Q7: Do you test all your goods before delivery? |
A: Yes, we have quality control all through our production and have final inspection by QC with AQL standard before shipment. |
Q8: How do you make long-term business and good relationship with customers? |
A: We keep good quality and competitive prices to ensure our customers’ benefits. And we sincerely respect every customer as our friends no matter where they come from. |
