| Adjust camera beam up and down through remote controller, Camera beam Length:2782mm |
| Column lift height: 1450-2110 |
| 32''TV &19''LCD show Measuring data & Parking Turntable Function |
| with static measuring,Turn Wheels & Static Alignment measuring function |
| 2pcs 5 Mega pixel camera |
| One interface show all parameters of front wheel and rear wheel(Toe,Camber,castor etc) |
| with Track width and Wheelbase measuring interface also |
| Calibration data Saved inside of Camera instead of Software |
| No need to Re-calibartion even Exchange Camera Inside Processor |
Camera Beam Whole Length 2782mm, With 2pcs 5 Mega Pixel Industrial Cameras
Camera Beam Adjusted up and Down through Remote Controller
With 3 Alignment Mode:Push Vehicle Alignment, Static alignment and Turn Target Plate Alignment
3D-ZD-6 Wheel Alignment Software -With Vehicle Diameter Measuring Function including Track Width and Wheelbase Measuring 
3D-ZD-6 Wheel Alignment Software -All Parameters showed in one Interface including toe, camber, caster etc..
3D-ZD-6 Wheel Alignment Target Plate: 5 years Warranty made by Korea ABS Material ..Very Tensile ..Kindly Visit Battle-Axe homepage and Watch the Vedio
3D-ZD-6 Wheel Alignment Technique Data
Parameter | Precise | Resolution | Test Range | Total testing Range |
Total toe | ±2′(±0.03º) | 0.6′( 0.01º) | ±20º | ±30º |
Individual toe | ±2′(±0.03º) | 0.6′( 0.01º) | ±10º | ±20º |
Camber | ±2′(±0.03º) | 0.6′( 0.01º) | ±10º | ±10º |
Castor | ±4′(±0.06º) | 0.6′(0.01º) | ±20º | ±30º |
SAI / KPI | ±4′(±0.06º) | 0.6′(0.01º) | ±20º | ±30º |
Setback | ±2′(±0.03º) | 0.6′(0.01º) | ±10º | ±20º |
Thrust angle | ±2′(±0.03º) | 0.6′( 0.01º) | ±10º | ±20º |
Wheelbase difference | ±2′(±0.03º) | 0.6′(0.01º) | ±10º | ±20º |
Track width difference | ±2′(±0.03º) | 0.6′(0.01º) | ±10º | ±20º |
Wheel size working range | 13′′-24′′ | |||
| Item | Package Size | N.G/W |
| camera beam | 3050X400X430MM-1pcs | 20/31.5kgs |
| cabinet | 2530x680x620MM-1pcs | 145/179.5kgs |
3D-ZD-6 Wheel Alignment Overall Size
-Warranty Period: within 12 months From Bill of loading date not including PC Unit including computer hard disk, LCD and Printer
-Computer, Printer and TV from China original, kindly check your local service center, or you can order our wheel aligner machine without computer,printer and LCD.. buy from local in order to get after service
-Computer Brand we used HP, Printer is Canon and TV Set from Haier (we will not give futher notify if we change brand)
-Easy spare parts like USB power line, insurance tube we will sent together with whole machine for future replacement, for other spare parts belongs to chargeble Range if replacement, Express cost beared by Buyer
-if the Parts can be Repair, we will not charge cost for Repair, but come and back Express cost on Buyer side
-Insurance will not covered with any Shipment Except for buyer Special Mentioned
-Generally Clear customs Documents we only supply Bill of loading, packing list and Commercial Invoice, if any special documents need like CO kindly Inform us in advance, otherwise we will not responsible for loose during clear customs
BATTLE-AXE is the leading manufacturer of tyre service equipment in China, specializing in Dynamic 3D Wheel Alignment System, CCD wheel alignment, Scissor Tyre Lifting Equipment, and Pneumatic Car Jack Since 2002, Located in Zhongshan City Guangdong Province China Not Far From Hongkong & Macau..Nearest Sea Port is Guangzhou and Shenzhen
Milestones
Battle-Axe Garage equipment Factory-Main Products
1)Wheel Alignment:3D wheel alignment
2)2.5tons 3 draw Pneumatic car jack
3)Alignment Scissor lift
Battle-Axe Wheel Alignment Factory For Referewnce
Battle-Axe Wheel Alignment Customer Show
How to Contact us ?
Email:aligntech@battle-axe
Whatsapp :+86 18689401703
