| Condition: | New | Manufacturer Part Number: | 5x114.3mm or 5x4.5 PCD/Bolt Pattern |
| Genuine OEM: | PE-5450-5500 | Interchange Part Number: | 32mm or 1.25 inches Thick, 71.5mm Centerbore |
| Thread Type: | 1/2"x20 or 1/2" UNF | Other Part Number: | 1/2"x20 or 1/2" UNF Studs / Nuts |
| THICKNESS: | 32mm or 1.25 inches | Surface Finish: | High Quality Aerospace Aluminum Silver |
| Bolt Pattern: | 5x114.3mm or 5x4.5 | Brand: | GWA |
| Second Bolt Pattern: | 5x127 or 5x5 |
Brand New High Quality Hub-centric & Wheel-Centric Aluminum Wheel Adapters for Jeep vehicles
CNC Machined using high quality aerospace aluminum
Our items are Hubcentric, which means they will fit over your hub perfect - eliminating possibility of vibrations
Comes with a wheel-centric lip that is 71.5mm in diameter so it will fit perfectly on OEM/Aftermarket wheels with 71.5mm centerbore.
Designed to install newer generation Jeep wheels
Moves the wheels further out from the hub, thus allowing you to install wider wheels/tires
Gives your car a more aggressive stance & allows for better handling characteristics
Fitment, Quality, & Durability tested
| Quantity | Four (4) | |
| Thickness | 32mm or 1.25 inches | |
| Centerbore | 71.5 | |
| Vehicle Bolt Pattern | 5x114.3mm or 5x4.5 | |
| Wheel Bolt Pattern | 5x127 or 5x5 | |
| Thread Type of Pressed- in Studs & Lug Nuts | 1/2"x20 or 1/2" UNF |
Fittings:
1980-2001 Jeep Cherokee (XJ)
1993-1998 Jeep Grand Cherokee (ZJ)
1980-2006 Jeep Wrangler (YJ, TJ)
2002-2012 Jeep Liberty (KJ, KK)
1986-1992 Jeep Comanche (MJ)
Important notes:
Installation should only be performed by a trained professional.
This listing is for Four (4) spacers with machine pressed wheel studs and lug nuts.
Your vehicle may have different thread pitch wheel studs than what's supplied with these wheel spacers. This means you would need to purchase different lug nuts for proper installation. Message us for more information prior to purchasing the items.
Make sure you get 5-7 FULL TURNS of the lug nuts before tightening.
Failure to follow proper procedures may cause your lug nuts to come undone while driving!!!
Your OEM/Factory wheel studs may extend past the surface of the spacer, if this is the case...
- Your wheels need to have cavities on the back between the mounting holes
OR
- The OEM/Factory studs will need to be shortened
OR
- You can purchase shorter studs and install them on your hub
No returns or exchange once installed
Please take the necessary measurements to ensure proper fitment. If you need assistance or guidance with how to take proper measurements, message us before making your purchase.
